VANKCUT Serie
Product Description
Technical Specifications
Laser System | VankCut 6040 | VankCut 9060 | VankCut 1390 | VankCut 1610 |
Laser Tube Power | 40W/60W/80W | 60W/80W/100W | 80W-150W | 80W-150W |
Working Area | 600x400mm | 900x600mm | 1300x900mm | 1600x1000mm |
Laser Tube | Sealed Glass Co2 Laser Tube,10.6μm | |||
Cooling Type | Water Cooling | |||
Engraving Speed | 0-60000mm/min | |||
Cutting Speed | 0-40000mm/min | |||
Laser Output Control | 0-100% set by software | |||
Min.Engraving Size | Chinese:2*2mm,English Letter:1*1mm | |||
Highest Scanning Precision | 4000DPI | |||
Locating Accuracy | ≤±0.01mm | |||
Control Software | Touch Panel Control | |||
Graphic Format Supported | DST/PLT/BMP/DXF/DWG/AI/HPGL… | |||
Compatible Software | CORELDRAW/PHOTOSHOP/AUTOCAD/TAJIMA… | |||
Drive System | High-precision 3-phase stepper motor | |||
Auxiliary Equipment | Exhaust fan and air exhaust pipe | |||
Power Supply | AC220V/220V±10% 50/60Hz | |||
Working Environment | Temperature:0-45°C,Humidity 5-95%(No condensate water) |
Applications
Materials
If your material is not in the below list, our Applications Team would be happy to assist you to test it.
Materials | Engrave | Cut |
Wood | ✔️ | ✔️ |
Acrylic | ✔️ | ✔️ |
Delrin | ✔️ | ✔️ |
Cloth | ✔️ | ✔️ |
Leather | ✔️ | ✔️ |
Mat Board | ✔️ | ✔️ |
Melamine | ✔️ | ✔️ |
Paper | ✔️ | ✔️ |
Mylar | ✔️ | ✔️ |
Pressboard | ✔️ | ✔️ |
Rubber | ✔️ | ✔️ |
Wood Veneer | ✔️ | ✔️ |
Fiberglass | ✔️ | ✔️ |
Plastic | ✔️ | ✔️ |
Cork | ✔️ | ✔️ |
Corian | ✔️ | ✔️ |
Twill | ✔️ | ✖️ |
Anodized Aluminum | ✔️ | ✖️ |
Painted Metals | ✔️ | ✖️ |
Tile | ✔️ | ✖️ |
Glass | ✔️ | ✖️ |
Coated Metals | ✔️ | ✖️ |
Ceramics | ✔️ | ✖️ |
Marble | ✔️ | ✖️ |
Stainless Steel | * | ✖️ |
Brass | * | ✖️ |
Titanium | * | ✖️ |
Bare Metal | * | ✖️ |
* means the laser cannot engrave directly, you will need the help of the “thermark spray”, you can visit www.vanklaser.com for more information.
Standard Features
Servo Motors 1000mm/s speed for engravingphoto, super smooth vector cutting quality | Smart board Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving | Laser software RDWorksV8 laser software. |
Aluminum Blade Cutting Table Reduce the influence of the reflection of laser. | Honeycomb Table Reduces underside reflections | Parameter Library Help you to save times. |
3D Engrave Engrave high quality 3D photos directly. | Visible Red Dot Pointer Make the laser beam “visible”. | High quality optics High quality optics. |
Connection ways High-speed Ethernet line or the USB cable line | USB disk interface Thunder laser system supports the USB disk loading. | Free Home position Freely change the starting position. |
Emergency stop Turn off the machine immediately when there is an accident. | Open flap protection Laser will stop working if you open the front cover. | Water protection Laser will stop working if the water cooling system is not working. |
Air Assist Blowing air to prevent the material being burned | Exhaust System Ensure the work pieces and laser cutter machine inside be clean. | Low-noise cooling fan Operate the laser in a quiet and comfortable surroundings. |
360º full view lucid acrylic cover Observe the working status at any time. | LCD Touch Panel Set speed, power, and more directly from the LCD panel. | High Quality Laser Tube Every laser tube must pass the strict quality control test. |
Mirror mount Vanklaser easily re-adjusting 3D. | Large buffer memory You can take the file directly from the memory. | Standard laser head It is the most often used head. |
High quality rails Keep the engraving/cutting precise and very durable. |