——PRODUCT ADVANTAGES——
——PRODUCT FEATURES——
|
|
|
Servo Motors Leadshine three stepper motor with high speed for cutting & engraving. | Smart board Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving. | Laser software RDWorksV8 laser software. |
 |  |  |
Aluminum Blade Cutting Tabl Reduce the influence of the reflection of laser. | Honeycomb Table Reduces underside reflections. | Parameter Library Help you to save times. |
|  |
|
3D Engrave Engrave high quality 3D photos directly | Visible Red Dot Pointer Make the laser beam “visible”. | High quality optics High quality optics. |
|
|
|
Connection ways High-speed Ethernet line or the USB cable line | USB disk interface Thunder laser system supports the USB disk loading | Free Home position Freely change the starting position. |
|
|
|
Emergency stop Turn off the machine immediately when there is an accident. | Open flap protection Laser will stop working if you open the front cover. | Water protection Laser will stop working if the water cooling system is not working. |
|
|
|
Air Assist Blowing air to prevent the material being burned. | Exhaust System Ensure the work pieces and laser cutter machine inside be clean. | Low-noise cooling fan Operate the laser in a quiet and comfortable surroundings. |
|  |  |
360º full view lucid acrylic cover Observe the working status at any time | Rdworks Control Panel Set speed, power, and more directly from the control panel. | High Quality Laser Tube Every laser tube must pass the strict quality control test. |
 |  |  |
Mirror mount Vanklaser easily re-adjusting 3D mirror mounts. | High quality rails Keep the engraving/cutting precise and very durable. | Standard laser head It is the most often used head. |
——PRODUCT PARAMETERS——
| Laser System | VankCut 6040/9060/1390/1610 |
| Laser Tube Power | 40W/60W/80W/100W/120W/150W |
| Working Area | 600x400mm/900x600mm/1300x900mm/1600x1000mm |
| Laser Tube | Sealed Glass Co2 Laser Tube,10.6μm |
| Cooling Type | Water Cooling |
| Engraving Speed | 0-60000mm/min |
| Cutting Speed | 0-40000mm/min |
| Laser Output Control | 0-100% set by software |
| Min.Engraving SizeChinese | 2*2mm,English Letter:1*1mm |
| Highest Scanning Precision | 4000DPI |
| Locating Accuracy | ≤±0.01mm |
| Control Software | Touch Panel Control |
| Graphic Format Supported | DST/PLT/BMP/DXF/DWG/AI/HPGL |
| Compatible Software | CORELDRAW/PHOTOSHOP/AUTOCAD/TAJIMA |
| Drive System | High-precision 3-phase stepper motor |
| Auxiliary Equipment | Exhaust fan and air exhaust pipe |
| Power Supply | AC220V/220V±10% 50/60Hz |
| Working Environment | Temperature:0-45°C,Humidity 5-95%(No condensate water) |
——PRODUCT DESCRIPTION——
What are the advantages of Vankcut-Series?
Laser engraving cutting offers a huge number of advantages to its users:
Laser engraving cutting allows for great control over beam intensity, length and heat output
Laser engraving cutting uses an extremely low level of power consumption, typically around 10Kw as compared to 50Kw used by other processes
Laser engraving cutting can work with a huge range of materials
Laser engraving cutting is a non-contact process, meaning that the laser beam itself never actually touches the material it works with.
This reduces heat damage to the surrounding area, which increases productivity by decreasing downtime and repair costs
Laser engraving cutting machines have very low maintenance costs and inexpensive parts for replacement
Laser engraving cutting delivers precise cuts with smooth finishes
Laser engraving cutting can switch quickly between multiple applications and setups, reducing time wastage and the need for multiple machines
With the above advantages, it is easy to see why laser cutting is becoming so widely use
——APPLICATION SHOW——
Our laser equipment are widely used in cutting & engraving wood, bamboo, jade, marble, organic glass, crystal,
plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.
——PRODUCT ADVANTAGES——
——PRODUCT FEATURES——
|
|
|
Servo Motors Leadshine three stepper motor with high speed for cutting & engraving. | Smart board Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving. | Laser software RDWorksV8 laser software. |
| | |
Aluminum Blade Cutting Tabl Reduce the influence of the reflection of laser. | Honeycomb Table Reduces underside reflections. | Parameter Library Help you to save times. |
| |
|
3D Engrave Engrave high quality 3D photos directly | Visible Red Dot Pointer Make the laser beam “visible”. | High quality optics High quality optics. |
|
|
|
Connection ways High-speed Ethernet line or the USB cable line | USB disk interface Thunder laser system supports the USB disk loading | Free Home position Freely change the starting position. |
|
|
|
Emergency stop Turn off the machine immediately when there is an accident. | Open flap protection Laser will stop working if you open the front cover. | Water protection Laser will stop working if the water cooling system is not working. |
|
|
|
Air Assist Blowing air to prevent the material being burned. | Exhaust System Ensure the work pieces and laser cutter machine inside be clean. | Low-noise cooling fan Operate the laser in a quiet and comfortable surroundings. |
| | |
360º full view lucid acrylic cover Observe the working status at any time | Rdworks Control Panel Set speed, power, and more directly from the control panel. | High Quality Laser Tube Every laser tube must pass the strict quality control test. |
| | |
Mirror mount Vanklaser easily re-adjusting 3D mirror mounts. | High quality rails Keep the engraving/cutting precise and very durable. | Standard laser head It is the most often used head. |
——PRODUCT PARAMETERS——
| Laser System | VankCut 6040/9060/1390/1610 |
| Laser Tube Power | 40W/60W/80W/100W/120W/150W |
| Working Area | 600x400mm/900x600mm/1300x900mm/1600x1000mm |
| Laser Tube | Sealed Glass Co2 Laser Tube,10.6μm |
| Cooling Type | Water Cooling |
| Engraving Speed | 0-60000mm/min |
| Cutting Speed | 0-40000mm/min |
| Laser Output Control | 0-100% set by software |
| Min.Engraving SizeChinese | 2*2mm,English Letter:1*1mm |
| Highest Scanning Precision | 4000DPI |
| Locating Accuracy | ≤±0.01mm |
| Control Software | Touch Panel Control |
| Graphic Format Supported | DST/PLT/BMP/DXF/DWG/AI/HPGL |
| Compatible Software | CORELDRAW/PHOTOSHOP/AUTOCAD/TAJIMA |
| Drive System | High-precision 3-phase stepper motor |
| Auxiliary Equipment | Exhaust fan and air exhaust pipe |
| Power Supply | AC220V/220V±10% 50/60Hz |
| Working Environment | Temperature:0-45°C,Humidity 5-95%(No condensate water) |
——PRODUCT DESCRIPTION——
What are the advantages of Vankcut-Series?
Laser engraving cutting offers a huge number of advantages to its users:
Laser engraving cutting allows for great control over beam intensity, length and heat output
Laser engraving cutting uses an extremely low level of power consumption, typically around 10Kw as compared to 50Kw used by other processes
Laser engraving cutting can work with a huge range of materials
Laser engraving cutting is a non-contact process, meaning that the laser beam itself never actually touches the material it works with.
This reduces heat damage to the surrounding area, which increases productivity by decreasing downtime and repair costs
Laser engraving cutting machines have very low maintenance costs and inexpensive parts for replacement
Laser engraving cutting delivers precise cuts with smooth finishes
Laser engraving cutting can switch quickly between multiple applications and setups, reducing time wastage and the need for multiple machines
With the above advantages, it is easy to see why laser cutting is becoming so widely use
——APPLICATION SHOW——
Our laser equipment are widely used in cutting & engraving wood, bamboo, jade, marble, organic glass, crystal,
plastic, garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.
Industrial Park Weiji Town, Xuzhou City,Jiangsu Province,China
+86 551 62630332
info@vanklaser.com 
+86-153-1885-9065 
