Availability: | |
---|---|
Quantity: | |
---MACHINE VIDEO---
---PRODUCT ADVANTAGES---
---PRODUCT FEATURES---
Stepper Motors Leadshine three stepper motor with high speed for cutting & engraving. | Smart board Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving. | Laser software RDWorksV8 laser software. |
Aluminum Blade Cutting Tabl Reduce the influence of the reflection of laser. | Rdworks Control Panel Set speed, power, and more directly from the control panel. | High Quality Laser Tube Every laser tube must pass the strict quality control test. |
3D Engrave Engrave high quality 3D photos directly | Visible Red Dot Pointer Make the laser beam “visible”. | High quality optics High quality optics. |
Connection ways High-speed Ethernet line or the USB cable line | USB disk interface Thunder laser system supports the USB disk loading | Free Home position Freely change the starting position. |
Emergency stop Turn off the machine immediately when there is an accident. | Open flap protection Laser will stop working if you open the front cover. | Water protection Laser will stop working if the water cooling system is not working. |
Air Assist Blowing air to prevent the material being burned. | Exhaust System Ensure the work pieces and laser cutter machine inside be clean. | Low-noise cooling fan Operate the laser in a quiet and comfortable surroundings. |
Mirror mount Vanklaser easily re-adjusting 3D mirror mounts. | High quality rails Keep the engraving/cutting precise and very durable. | Standard laser head It is the most often used head. |
---PRODUCT PARAMETERS---
Laser System | VankCut Mix |
Laser Tube Power | 100w/120w/150w/300w |
Working Area | 1300x2500 |
Laser Tube | Sealed Glass Co2 Laser Tube, 10.6μm |
Cooling Type | Water Cooling |
Engraving Speed | 0-60000mm/min |
Cutting Speed | 0-40000mm/min |
Laser Output Control | 0-100% set by software |
Min.Engraving SizeChinese | 2*2mm, English Letter:1*1mm |
Highest Scanning Precision | 4000DPI |
Locating Accuracy | ≤±0.01mm |
Control Software | Touch Panel Control |
Graphic Format Supported | DST/ PLT/ BMP/ DXF/ DWG/ AI/ HPGL |
Compatible Software | CORELDRAW/ PHOTOSHOP/ AUTOCAD/ TAJIMA |
Drive System | High-precision 3-phase stepper motor |
Auxiliary Equipment | Exhaust fan and air exhaust pipe |
Power Supply | AC220V/220V±10% 50/60Hz |
Working Environment | Temperature:0-45°C, Humidity 5-95%(No condensate water) |
---APPLICATION SHOW---
• Our laser equipment are widely used in materials of wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass , metal,steel.
---PRODUCT DESCRIPTION---
What are the advantages of VankCut Mix?
Laser engraving cutting offers a huge number of advantages to its users:
• Laser engraving cutting allows for great control over beam intensity, length and heat output.
• Laser engraving cutting uses an extremely low level of power consumption, typically around 10Kw as compared to 50Kw used by other processes.
• Laser engraving cutting can work with a huge range of materials.
• Laser engraving cutting is a non-contact process, meaning that the laser beam itself never actually touches the material it works with.
• This reduces heat damage to the surrounding area, which increases productivity by decreasing downtime and repair costs.
• Laser engraving cutting machines have very low maintenance costs and inexpensive parts for replacement.
• Laser engraving cutting delivers precise cuts with smooth finishes.
• Laser engraving cutting can switch quickly between multiple applications and setups, reducing time wastage and the need for multiple machines.
• With the above advantages, it is easy to see why laser cutting is becoming so widely use.
---MACHINE VIDEO---
---PRODUCT ADVANTAGES---
---PRODUCT FEATURES---
Stepper Motors Leadshine three stepper motor with high speed for cutting & engraving. | Smart board Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving. | Laser software RDWorksV8 laser software. |
Aluminum Blade Cutting Tabl Reduce the influence of the reflection of laser. | Rdworks Control Panel Set speed, power, and more directly from the control panel. | High Quality Laser Tube Every laser tube must pass the strict quality control test. |
3D Engrave Engrave high quality 3D photos directly | Visible Red Dot Pointer Make the laser beam “visible”. | High quality optics High quality optics. |
Connection ways High-speed Ethernet line or the USB cable line | USB disk interface Thunder laser system supports the USB disk loading | Free Home position Freely change the starting position. |
Emergency stop Turn off the machine immediately when there is an accident. | Open flap protection Laser will stop working if you open the front cover. | Water protection Laser will stop working if the water cooling system is not working. |
Air Assist Blowing air to prevent the material being burned. | Exhaust System Ensure the work pieces and laser cutter machine inside be clean. | Low-noise cooling fan Operate the laser in a quiet and comfortable surroundings. |
Mirror mount Vanklaser easily re-adjusting 3D mirror mounts. | High quality rails Keep the engraving/cutting precise and very durable. | Standard laser head It is the most often used head. |
---PRODUCT PARAMETERS---
Laser System | VankCut Mix |
Laser Tube Power | 100w/120w/150w/300w |
Working Area | 1300x2500 |
Laser Tube | Sealed Glass Co2 Laser Tube, 10.6μm |
Cooling Type | Water Cooling |
Engraving Speed | 0-60000mm/min |
Cutting Speed | 0-40000mm/min |
Laser Output Control | 0-100% set by software |
Min.Engraving SizeChinese | 2*2mm, English Letter:1*1mm |
Highest Scanning Precision | 4000DPI |
Locating Accuracy | ≤±0.01mm |
Control Software | Touch Panel Control |
Graphic Format Supported | DST/ PLT/ BMP/ DXF/ DWG/ AI/ HPGL |
Compatible Software | CORELDRAW/ PHOTOSHOP/ AUTOCAD/ TAJIMA |
Drive System | High-precision 3-phase stepper motor |
Auxiliary Equipment | Exhaust fan and air exhaust pipe |
Power Supply | AC220V/220V±10% 50/60Hz |
Working Environment | Temperature:0-45°C, Humidity 5-95%(No condensate water) |
---APPLICATION SHOW---
• Our laser equipment are widely used in materials of wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic, glass , metal,steel.
---PRODUCT DESCRIPTION---
What are the advantages of VankCut Mix?
Laser engraving cutting offers a huge number of advantages to its users:
• Laser engraving cutting allows for great control over beam intensity, length and heat output.
• Laser engraving cutting uses an extremely low level of power consumption, typically around 10Kw as compared to 50Kw used by other processes.
• Laser engraving cutting can work with a huge range of materials.
• Laser engraving cutting is a non-contact process, meaning that the laser beam itself never actually touches the material it works with.
• This reduces heat damage to the surrounding area, which increases productivity by decreasing downtime and repair costs.
• Laser engraving cutting machines have very low maintenance costs and inexpensive parts for replacement.
• Laser engraving cutting delivers precise cuts with smooth finishes.
• Laser engraving cutting can switch quickly between multiple applications and setups, reducing time wastage and the need for multiple machines.
• With the above advantages, it is easy to see why laser cutting is becoming so widely use.