Installed with the high speed servo motor systems, the VankPro Series laser cutter is working at an unbelievable speed with excellent quality. It’s especially good for customers who need to mass produce their products. There’re different sizes of cutters for your choice.
Leadshine three stepper motor with high speed for cutting & engraving.
Control the exhaust fan,air assist, and alarm lamp automaticly, energy saving.
RDWorksV8 laser software.
Aluminum Blade Cutting Tabl
Reduce the influence of the reflection of laser.
Reduces underside reflections.
Help you to save times.
3D EngraveEngrave high quality 3D photos directly
Visible Red Dot Pointer
Make the laser beam “visible”.
High quality optics
High quality optics.
Connection waysHigh-speed Ethernet line or the USB cable line
USB disk interfaceThunder laser system supports the USB disk loading
Free Home position
Freely change the starting position.
Turn off the machine immediately when there is an accident.
Open flap protection
Laser will stop working if you open the front cover.
Laser will stop working if the water cooling system is not working.
Blowing air to prevent the material being burned.
Ensure the work pieces and laser cutter machine inside be clean.
Low-noise cooling fan
Operate the laser in a quiet and comfortable surroundings.
360º full view lucid acrylic cover
Observe the working status at any time
|Rdworks Control Panel |
Set speed, power, and more directly from the control panel.
High Quality Laser Tube
Every laser tube must pass the strict quality control test.
Vanklaser easily re-adjusting 3D mirror mounts.
High quality rails
Keep the engraving/cutting precise and very durable.
Standard laser head
It is the most often used head.
|Laser System||VankPro 9060/1390/1490|
|Laser Tube Power||40W/60W/80W/100w/120w/150w|
|Laser Tube||Sealed Glass Co2 Laser Tube,10.6μm|
|Cooling Type||Water Cooling|
|Laser Output Control||0-100% set by software|
|Min.Engraving SizeChinese||2*2mm,English Letter:1*1mm|
|Highest Scanning Precision||4000DPI|
|Control Software||Touch Panel Control|
|Graphic Format Supported||DST/PLT/BMP/DXF/DWG/AI/HPGL|
|Drive System||High-precision 3-phase stepper motor|
|Auxiliary Equipment||Exhaust fan and air exhaust pipe|
|Power Supply||AC220V/220V±10% 50/60Hz|
|Working Environment||Temperature:0-45°C,Humidity 5-95%(No condensate water)|
Laser engraving cutting offers a huge number of advantages to its users:
Laser engraving cutting allows for great control over beam intensity, length and heat output
Laser engraving cutting uses an extremely low level of power consumption, typically around 10Kw as compared to 50Kw used by other processes
Laser engraving cutting can work with a huge range of materials
Laser engraving cutting is a non-contact process, meaning that the laser beam itself never actually touches the material it works with.
Laser engraving cutting machines have very low maintenance costs and inexpensive parts for replacement
Laser engraving cutting delivers precise cuts with smooth finishes
Laser engraving cutting can switch quickly between multiple applications and setups, reducing time wastage and the need for multiple machines
With the above advantages, it is easy to see why laser cutting is becoming so widely use
Our laser equipment are widely used in materials of wood, bamboo, jade, marble, organic glass, crystal, plastic,
garments, paper, leather, rubber, ceramic, glass and other nonmetal materials.